| 数据搜索系统,热门电子元器件搜索 |
|
AD9546/PCBZ 数据表(PDF) 24 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD9546/PCBZ 数据表(HTML) 24 Page - Analog Devices |
|
24 / 205 page ![]() AD9546 Data Sheet Rev. 0 | Page 24 of 205 DPLL PROPAGATION DELAY VARIATION The PLL channels of the AD9546 have an inherent propagation delay (see Table 18) that can be nominally offset using the skew adjustment feature in the source profiles of the device. Dynamic variations that are proportional to temperature change can be mitigated with the delay compensation mechanism of the AD9546. A polynomial with programmable coefficients of temperature (see the Delay Compensation section) determines the response of the delay compensation circuit. An additive inverse of the polynomial function derives from a best fit algorithm applied to the uncompensated delay variation measurements. Active delay compensation uses the additive inverse polynomial in an attempt to nullify the delay variation over temperature. For a second-order polynomial, the measured data without delay compensation in Table 19 is the first-order representation for the various device configurations. A repeat of the same measurement with the inverse coefficient programmed yields the slopes of the residual delay in the specifications with delay compensation in Table 19. See Figure 25 and Figure 26 for the related plots. The tabulated data with delay compensation in Table 19 reflects an average of several devices that are programmed with the same delay compensation coefficients. The tabulated residual errors are greater than expected for coefficients that are optimized for an individual device. The DPLL propagation delay variation results depend on the device being configured with a 1:1 frequency translation ratio, where fREF = fOUT = 10 MHz, the reference input configured to 1.2V CMOS, and DPLL configured to zero delay (hitless). A die temperature range of −40°C to +105°C applies for both the uncompensated and compensated results. Table 19. Parameter Min Typ Max Unit OUTPUT DRIVER MODE Differential CML Without Delay Compensation 0.517 ps/°C With Delay Compensation −0.0155 ps/°C HCSL Without Delay Compensation 0.624 ps/°C With Delay Compensation −0.0253 ps/°C Single-Ended CML Without Delay Compensation 0.681 ps/°C With Delay Compensation 0.0208 ps/°C HCSL Without Delay Compensation 0.861 ps/°C With Delay Compensation 0.0288 ps/°C |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |