| 数据搜索系统,热门电子元器件搜索 |
|
ZUSBOPTSC01ZACG 数据表(PDF) 27 Page - Zilog, Inc. |
|
|
|||||||||||||||||||||||||||||
ZUSBOPTSC01ZACG 数据表(HTML) 27 Page - Zilog, Inc. |
|
27 / 282 page ![]() PS022827-1212 P R E L I M I N A R Y Signal Descriptions Z8 Encore! XP® F082A Series Product Specification 10 Signal Descriptions Table 2 describes the Z8 Encore! XP F082A Series signals. See the Pin Configurations section on page 8 to determine the signals available for the specific package styles. Table 2. Signal Descriptions Signal Mnemonic I/O Description General-Purpose I/O Ports A–D PA[7:0] I/O Port A. These pins are used for general-purpose I/O. PB[7:0] I/O Port B. These pins are used for general-purpose I/O. PB6 and PB7 are available only in those devices without an ADC. PC[7:0] I/O Port C. These pins are used for general-purpose I/O. PD[0] I/O Port D. This pin is used for general-purpose output only. UART Controllers TXD0 O Transmit Data. This signal is the transmit output from the UART and IrDA. RXD0 I Receive Data. This signal is the receive input for the UART and IrDA. CTS0 I Clear To Send. This signal is the flow control input for the UART. DE O Driver Enable. This signal allows automatic control of external RS-485 drivers. This signal is approximately the inverse of the TXE (Transmit Empty) bit in the UART Status 0 Register. The DE signal may be used to ensure the external RS-485 driver is enabled when data is transmitted by the UART. Timers T0OUT/T1OUT O Timer Output 0–1. These signals are outputs from the timers. T0OUT/T1OUT O Timer Complement Output 0–1. These signals are output from the timers in PWM Dual Output mode. T0IN/T1IN I Timer Input 0–1. These signals are used as the capture, gating and coun- ter inputs. Comparator CINP/CINN I Comparator Inputs. These signals are the positive and negative inputs to the comparator. COUT O Comparator Output. Notes: 1. PB6 and PB7 are only available in 28-pin packages without ADC. In 28-pin packages with ADC, they are replaced by AVDD and AVSS. 2. The AVDD and AVSS signals are available only in 28-pin packages with ADC. They are replaced by PB6 and PB7 on 28-pin packages without ADC. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |