| 数据搜索系统,热门电子元器件搜索 |
|
STR720 数据表(PDF) 337 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STR720 数据表(HTML) 337 Page - STMicroelectronics |
|
337 / 401 page ![]() STR720 - S-D ANALOG/DIGITAL CONVERTER (ADC) 337/401 The word lengths needed in each integrator and differentiator are given by the formula b=3log2(N) + 1. This gives a maximum word length of 21 bits for the internal registers. As the output is only 16 bits, the LSBs are discarded. Note Only the 12 most significant bits out of this 16 bits are guaranteed to be accurate according to the device specification, even if all 16 bits can be read. Since the first zero of the decimation filter is located at while the first replica of the spectrum of the modulator after decimation is located at: care must be taken to ensure that the Nyquist criterion is respected to avoid alias, i.e.: The description above refers to the operations in normal decimation mode. When low-rate decimation mode is selected, the registers in the decimated section will be updated when the count gets to 1700 instead of 170 and the world length of the registers will be 33 bits instead of 23, the final value containing bits 33:18 of the final differentiator. The reset of the filter will occur every 5120 cycles instead of every 512. 22.3.8 Bandgap Reference An on-chip bandgap reference generates a 1.22 V reference. This is used to generate two voltages used by the modulator — VCM & VREF. VCM is designed to be 1.25 V, the midpoint of the converter’s voltage range and VREF is the feedback reference, 1.74 V. As the bandgap reference is not trimmed, absolute values of VCM & VREF could be inaccurate by up to± 5%. This will lead to gain and offset errors in the converter which can be calibrated out digitally if necessary. To calibrate the converter it is necessary to input the minimum and maximum inputs supported — 0 V and 2.5 V. The digital output for a 0 V input is the offset and the gain of the converter is given by: The offset and gain correction factors can be stored digitally and applied to all outputs from the converter, for all four input channels. ω 2 π 171 --------- = ω 2 π 2048 ------------ = F s F Nyq 2F Max = ≥ G 2.5Voutput 0Voutput – () 2.5 ---------------------------------------------------------------- = |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |