| 数据搜索系统,热门电子元器件搜索 |
|
LAN9252/ML 数据表(PDF) 37 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN9252/ML 数据表(HTML) 37 Page - Microchip Technology |
|
37 / 329 page ![]() 2015 Microchip Technology Inc. DS00001909A-page 37 LAN9252 6.0 CLOCKS, RESETS, AND POWER MANAGEMENT 6.1 Clocks The device provides generation of all system clocks as required by the various sub-modules of the device. The clocking sub-system is comprised of the following: • Crystal Oscillator • PHY PLL 6.1.1 CRYSTAL OSCILLATOR The device requires a fixed-frequency 25 MHz clock source for use by the internal clock oscillator and PLL. This is typ- ically provided by attaching a 25 MHz crystal to the OSCI and OSCO pins as specified in Section 18.7, "Clock Circuit," on page 320. Optionally, this clock can be provided by driving the OSCI input pin with a single-ended 25 MHz clock source. If a single-ended source is selected, the clock input must run continuously for normal device operation. Power savings modes allow for the oscillator or external clock input to be halted. The crystal oscillator can be disabled as describe in Section 6.3.4, "Chip Level Power Management," on page 45. For system level verification, the crystal oscillator output can be enabled onto the IRQ pin. See Section 8.2.7, "Clock Output Test Mode," on page 56. Power for the crystal oscillator is provided by a dedicated regulator or separate input pin. See Section 4.1.2, "1.2 V Crys- tal Oscillator Regulator," on page 31. 6.1.2 PHY PLL The PHY module receives the 25 MHz reference clock and, in addition to its internal clock usage, outputs a main system clock that is used to derive device sub-system clocks. The PHY PLL can be disabled as describe in Section 6.3.4, "Chip Level Power Management," on page 45. The PHY PLL will be disabled only when requested and if the PHY ports are in a power down mode. Power for PHY PLL is provided by an external input pin, usually sourced by the device’s 1.2V core regulator. See Section 4.0, "Power Connections," on page 29. Note: Crystal specifications are provided in Table 18-12, “Crystal Specifications,” on page 320. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |