| 数据搜索系统,热门电子元器件搜索 |
|
PC87373 数据表(PDF) 100 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
PC87373 数据表(HTML) 100 Page - National Semiconductor (TI) |
|
100 / 174 page ![]() 6.0 System Wake-Up Control (SWC) (Continued) 100 www.national.com Revision 1.1 6.4.6 General-Purpose Status 1 Register 2 (GPE1_STS_2) This register contains “child” events 16-23 of the GPE1_STS register. The status bits behave according to the Sticky status bit definition in the ACPI Specification (i.e., the bit is set when the level of the hardware signal is high and is only cleared by the software writing 1 to it). Power Well: VSB3 Location: Offset 0Ah Type: R/W1C Bit 76543210 Name KBD_EVT3 _STS KBD_EVT2 _STS KBD_EVT1 _STS MS_EVT _STS KBD_ANYK _STS RI1_EVT _STS RI2_EVT _STS Reserved Reset 00000000 Bit Description 7 KBD_EVT3_STS (Keyboard Event 3 Status). Indicates that “PM Key 3” was pressed and that the event was identified by the Keyboard/Mouse Wake-Up Detector. This bit is set only if the Keyboard/Mouse Wake-Up Detector is in Power Management Keys mode (see Section 6.3.7 on page 94). Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: The “PM Key 3” key was pressed on the keyboard 6 KBD_EVT2_STS (Keyboard Event 2 Status). Indicates that “PM Key 2” was pressed and that the event was identified by the Keyboard/Mouse Wake-Up Detector. This bit is set only if the Keyboard/Mouse Wake-Up Detector is in Power Management Keys mode (see Section 6.3.7 on page 94). Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: The “PM Key 2” key was pressed on the keyboard 5 KBD_EVT1_STS (Keyboard Event 1 Status). This bit indicates that a keyboard event occurred and was identified by the Keyboard/Mouse Wake-Up Detector. The event type depends on the selected operation mode for the Keyboard/Mouse Wake-Up Detector (see Sections 6.3.7 and 6.3.8 on page 94.): q Pressing any key or a sequence of special keys in Special Key Sequence mode q Pressing a sequence of keys in Password mode q Pressing the “PM Key 1” in Power Management Keys mode Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: A keyboard event occurred 4 MS_EVT_STS (Mouse Event Status). Indicates that a mouse event occurred and was identified by the Keyboard/Mouse Wake-Up Detector (see Section 6.3.8 on page 95). Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: A mouse event occurred 3 KBD_ANYK_STS (Keyboard Any-Key Status). This bit indicates that any key was pressed and that the event was identified by the Keyboard/Mouse Wake-Up Detector. This bit is set only if the Keyboard/Mouse Wake-Up Detector is in Fast Any-Key mode (see Section 6.3.7 on page 94). Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: A keyboard event occurred 2 RI1_EVT_STS (RI1 Event Status). Indicates that a telephone ring signal was received at Serial Port 1 and the event was identified by the RI Wake-Up Detector. This bit is set by a high-to-low transition at the RI1 pin (see Section 6.2.1 on page 81). Writing 1 clears this bit; writing 0 is ignored. 0: Inactive since last cleared (default) 1: A telephone ring signal was received at Serial Port 1 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |